Water Baths
Thermoline Boiling Bath
This boiling bath is designed to operate at +100°C and is fitted with removable concentric rings ranging in size from 30, 50, 75 and 100mm in diameter to support round based flasks of varying sizes.
Features:
- Seamless stainless steel bath with fibreglass insulation and high capacity calrod element for rapid heat up
- Temperature control is by an adjustable Simmerstat Energy Regulator
- Fitted with a constant water level device and can be connected to an adjacent tap
- The bath needs to be able to drain constantly to maintain the correct water level
- This model has a Manual Reset Safety Thermostat
Thermoline Circulated Bath
Thermoline have a quality range of general purpose circulated water baths. These baths are Australian designed for safety, reliability and longevity.
Features:
- Insulated Circulated Bath standard sizes 12, 24, and 48 litre capacity
- Seamless Stainless Steel tank
- Radial corners (quick and easy to clean or disinfect)
- Carry handles fitted as standard
- Custom baths can be ordered to suit your application
- Temperature range when using TU-series of Heater Circulators (see page B-4) ambient +5ºC to +100ºC
- Extended temperature range of -30ºC to +80ºC circulated baths available
Thermoline Cooled Precision Bath
Thermoline have three precision circulated baths available, all ideal for applications where low liquid temperatures are required. All models have a digital display to show the set value and liquid value. The built in microprocessor control ensures temperature stability at set point better than ±0.2ºC. All tanks are constructed from stainless steel and are well insulated to help contain the temperature within the bath.
Features:
- TBC-1-10 has the unique cooling coil wound round the outside of the tank making the entire internal volume useable
- Wide temperature control range -30ºC to +100ºC (model dependant)
- Built in heating and cooling system
- Drain tap for easy cleaning or changing of liquid
- Pump out facility allows for closed loop heat exchange application
Thermoline Floatation Bath
New style Floatation Bath for tissue work featuring illuminated lift out borosilicate glass insert. Dimensions of the insert are 28x20x5cm deep, with a lid to cover the bath when not in use. Samples are illuminated from below the water surface by a built in 9W high efficiency lamp. The lamp is easily changed if necessary by removing the stainless steel work top. The unit is finished in PVC coated steel with a stainless steel work top area.
Thermoline Large Capacity Water Bath
Thermoline large laboratory and industrial water baths are available in two standard capacities and custom baths can be ordered to suit most applications. They have a stainless steel internal tank and stainless steel perforated height adjustable floor and are fully insulated. Can be used with optional Heater Circulator.
Thermoline Uncirculated Baths
The insulated uncirculated bath comes in standard sizes 12, 24, and 48 litre capacity and are fitted with digital solid state control for greater accuracy and reliability. They have seamless stainless steel tanks and radial corners for quick and easy cleaning or disinfecting. Carry handles fitted as standard and there is a perforated removable floor. Temperatures range from ambient +5ºC to +100ºC and there is a manual reset safety thermostat.
Custom baths can be ordered to suit your application.