Rotary Table Sample Splitter

Supplied with conical hopper sloped for optimal gravity feeding. This is the ideal system to avoid and prevent media segregation. The media flowing through this 35 litre hopper is regulated using an adjustable feeding gate. A vibrator feeder is available upon request.

The feeding conveyor adjusts infinitely between 0-17 meters/min while the rotary table adjusts infinitely between 0-62 rpm. You can set the quantity of media going into the containers at each revolution to your exact calibration.

Our standard unit is supplied with 12 heavy-duty stainless steel containers with a capacity of 3.5kg. They are fully interchangeable, self-aligning and easily handled. The capacity and number of containers can be ordered to suit your specific applications.

The standard power supply required is 115V or 220V / 1 phase / 50 or 60Hz. Other power supplies are also available.

Jones Riffle Sample Splitter

The riffle splitter includes a riffle, stand and pan in galvanised steel or stainless steel. A dust outlet in the corner of the splitter is to be connected to your dust extraction system which will keep the environment clean

The unit includes two drawers and slagging tables and customised tables are available. The units are available in various combinations of 228mm or 304mm widths and 457mm or 304mm lengths with riffle spacing ranging from 9.5mm to 25.4mm.

Type 2 Rotary Arm Splitter

This splitter is good for samples up to 1.5kg. Sample desired discharges into drawer. The sample quantity is adjustable to required amounts and sample feeder bin holds 50 litres of material. Reject material will be discarded into contained bin or can be disposed via a conveyor.

This unit is available with variable speeds for you to calibrate to your needs.

Sludge or Liquid Divider

The sludge / liquid divider has a rotary table with variable speeds adjustable between 0-100rpm and the receiving containers are available in different sizes to suit all requirements while reject liquid will gather below the rotary table.

All parts in contact with the sludge / liquid are made of stainless steel and shakers for pre-mixing sedimentary liquids are available for every application.

The 2 valve version has a pneumatic valve, for shut-off and opening the flow and a fine manual adjustable valve for flow control. The 2 valve version is needed where pre-mixing (shaking) of sludge or dense liquids with sediments is necessary.

The 1 valve version is supplied only with the manual valve for controlling the flow with fine adjustments. Therefore, one will have to test first flow rate and then load the conical hopper to achieve desired divisions. The liquid will flow immediately from the hopper through the valve to the containers while the rotary table had been previously started at the desired speed. The 1 valve version is suitable for applications where liquids are consistently uniform.

Rotating Divider

The system consists of a conical feeding hopper that lets the media flow by gravity onto a reverse rotating cone located precisely in the centre of the opening. This cone spreads the media 360 degrees uniformly into a sample drawer and into a container for your reject. It will divide up to 5kg of sample into a portion for your sample and a portion that is reject.

An adjustable lifting mechanism allows for a very simple way to control media flow and the sample drawer is adjustable to the size of sample you require.

The divider is controlled by a variable speed motor. The standard power supply is 110-220V/single phase/50-60Hz. Other power supplies are also available.